An independent guide to wireless headphones and speakers. It does not sell devices, gives no medical advice and is not connected with the former website on this domain.

no wires: a guide to wireless headphones and speakers

Ivashov — a guide to life without wires

Wireless headphones and speakers seem simple as long as everything works. Then one day they don't appear in the device list, the sound in a film starts lagging behind the actors' lips, and one earbud suddenly goes quiet in the middle of a call. Ivashov explains how a wireless connection works, why these glitches happen and what you can calmly check yourself before deciding a device is faulty. We write in general terms, without brands or models, so the advice fits most headphones and speakers.

Almost every problem with wireless headphones starts with three questions: are they charged, what are they connected to right now, and how far away is the phone?

— From the editors

Where to start

Connect first time

Put the headphones into pairing mode as the manual describes, find them in the device list and confirm the connection. From then on they will recognise the phone by themselves.

Sound without lag

If the voice in a video is out of step with the picture, it is usually not a fault. We look at where the lag comes from and which settings help reduce it.

A battery that lasts

The charging case, not leaving headphones flat for months and handling the contacts with care all extend the life of even small batteries.

Volume and safety

Don't listen loudly for long, and pay attention to the volume warning that many devices show. Near traffic, always leave yourself able to hear what is going on around you.

Guide sections

  • Guides

    Step-by-step advice: first connection, two devices at once, sound in videos and games, the microphone on calls, caring for ear tips. Plus our article catalogue.

  • Tools

    The paired devices list, pairing mode, the charging case, sound settings, the volume warning and finding a lost earbud.

  • Comparisons

    In-ear, on-ear and over-ear headphones, wired versus wireless, headphones versus a portable speaker: pros, cons and who each one suits.

  • Problems

    Headphones not showing up, sound dropping out or lagging, only one earbud playing, callers struggling to hear you, battery draining too fast.

  • Security

    Loud sound for long periods, headphones on the street and in transport, unwanted connections, loss, battery overheating and selling without a reset.

  • Glossary

    Pairing, multipoint, codec, latency, noise cancelling, transparency mode, ear tips and cushions and other terms, in plain language.

  • Questions

    Answers about the guide, connecting and sound quality, the battery and using wireless headphones and speakers safely.

Pairing in five steps

  1. Charge the headphones

    Put the earbuds in their charging case or plug the speaker in, even briefly. With an almost empty battery a device may switch on but never appear in the list.

  2. Turn on pairing mode

    How you do this depends on the device: on some you open the case lid, on others you hold a button or touch a sensor. The manufacturer's manual explains exactly how. A blinking light or a voice prompt usually tells you it is ready.

  3. Find them in the device list

    Open the Bluetooth settings on your phone or computer and wait until the headphones' name appears among the available devices. Keep them close, within arm's reach.

  4. Confirm the connection

    Tap the name and accept the request if one appears. The headphones will then be added to the list of paired devices and will connect next time without any extra steps.

  5. Test the sound and microphone

    Play any recording and make sure the sound comes through the headphones, not the phone speaker. Then call a friend or family member, or record a voice memo, to check the microphone.

The essentials in brief

Do you sell headphones?

No. Ivashov is an independent guide. We don't sell anything, repair devices or take orders; we only explain how to use wireless audio.

Which headphones are best?

We don't recommend specific brands or models. Instead we explain what to look for: a comfortable fit, whether you need noise cancelling, whether the headphones can work with two devices at once and how long they hold a charge.

Why is the technology called Bluetooth?

It is named after the 10th-century Danish king Harald "Bluetooth". The name was proposed as a working title: the technology was meant to unite different devices just as the king united lands.

Are wireless headphones bad for your hearing?

We don't give medical advice. We will only share a general rule: don't listen loudly for long. Many phones and players show a volume warning by themselves, and it is worth taking seriously.

About the project

Ivashov is an independent guide to wireless headphones and speakers for everyday listeners. We write about day-to-day matters: pairing, connecting to several devices, audio lag, dropouts, charging and care. The guide has no connection with earlier websites on this domain and does not reproduce their content.

We name no brands, models or apps, publish no rankings and give no medical advice. Menus and buttons differ from device to device, so we explain the principle, and the manual for your headphones or speaker will always give the exact steps.

  • Guides

    Step-by-step advice: first connection, two devices at once, sound in videos and games, the microphone on calls, caring for ear tips. Plus our article catalogue.

  • Problems

    Headphones not showing up, sound dropping out or lagging, only one earbud playing, callers struggling to hear you, battery draining too fast.

  • Security

    Loud sound for long periods, headphones on the street and in transport, unwanted connections, loss, battery overheating and selling without a reset.

  • Comparisons

    In-ear, on-ear and over-ear headphones, wired versus wireless, headphones versus a portable speaker: pros, cons and who each one suits.

  • Glossary

    Pairing, multipoint, codec, latency, noise cancelling, transparency mode, ear tips and cushions and other terms, in plain language.

Sources

  • Reference material on Bluetooth (in general terms)
  • Headphone and speaker manufacturers' instructions (in general terms)
  • The guide's editorial material

This guide describes wireless audio in general terms and reflects the editors' view as of the date it was prepared. Headphones and speakers are controlled in different ways: some with a button, some with a touch, and settings on phones and computers are not always named the same. If your device's manual says otherwise, follow the manual.