An independent guide to wireless headphones and speakers. It does not sell devices, gives no medical advice and is not connected with the former website on this domain.

Glossary

Glossary of terms

Manuals for headphones and speakers are often written as if the reader already knows everything. This glossary covers the most common wireless audio terms, each explained in a couple of sentences without engineering detail. If you come across a setting you don't understand, its meaning is most likely described below.

Neither the headphones nor the phone chooses the codec on its own: the two devices agree on it together.

— From the editors

How this section works: definitions are short and split into three groups: connection, sound, and device care.

Bluetooth
A wireless technology for connecting devices over short distances. It works in the 2.4 GHz band; the most common mode is designed for a range of up to about 10 metres, but indoors the real range is often much less. The standard is developed by an industry group, the Bluetooth SIG, officially announced in 1998.
Pairing
The first introduction between two devices, after which they remember each other. You don't need to repeat it: from then on the headphones connect by themselves until you remove them from the list.
Multipoint
The ability of headphones to stay connected to two devices at once, such as a phone and a laptop, and switch between them. Not all headphones support it.
Factory reset
Returning headphones or a speaker to their original state: remembered devices and personal settings are erased. It is done following the manufacturer's instructions and helps with persistent glitches and before selling.

Sound

Codec
A way of packing sound for transmission over the air and unpacking it on the other side. Which codec is used is decided by both devices together, based on what each of them supports.
Latency
The time between the sound being sent from the phone and you hearing it. Wireless headphones always have some; in videos it is usually compensated for, in games it is more noticeable.
Noise cancelling
A feature in which the headphones pick up surrounding noise with microphones and reduce it. Handy on public transport and in noisy places, but it drains the battery faster.
Transparency mode
The opposite of noise cancelling: the headphones let in surrounding sounds so you can hear voices and the street without taking them off.

Care and accessories

Charging case
A case for earbuds with a built-in battery. It stores the earbuds, protects them and recharges them while they are inside.
Ear tips and cushions
Soft tips or pads that touch your ear. They determine how comfortable the fit is and how well the headphones block out noise. They should be wiped clean and replaced over time.
  • Comparisons

    In-ear, on-ear and over-ear headphones, wired versus wireless, headphones versus a portable speaker: pros, cons and who each one suits.

  • Guides

    Step-by-step advice: first connection, two devices at once, sound in videos and games, the microphone on calls, caring for ear tips. Plus our article catalogue.

  • Problems

    Headphones not showing up, sound dropping out or lagging, only one earbud playing, callers struggling to hear you, battery draining too fast.

  • Tools

    The paired devices list, pairing mode, the charging case, sound settings, the volume warning and finding a lost earbud.

  • Questions

    Answers about the guide, connecting and sound quality, the battery and using wireless headphones and speakers safely.

Sources

  • Reference material on Bluetooth (in general terms)
  • Headphone and speaker manufacturers' instructions (in general terms)
  • The guide's editorial material

This guide describes wireless audio in general terms and reflects the editors' view as of the date it was prepared. Headphones and speakers are controlled in different ways: some with a button, some with a touch, and settings on phones and computers are not always named the same. If your device's manual says otherwise, follow the manual.